How to assemble a pagoda tent?

Pagoda tents are very common in daily life, pagoda tents have been widely used in small scenes such as ticket checkpoints, security checkpoints, event sites, and conference activities.

Pagoda tents are different from ordinary four-corner tents, the high-quality aluminum alloy structure of the pagoda tents make it more stable and durable, and can resist 8~10 wind. At the same time, the fabric cover is made of high-quality PVC double coated polyester, compared with ordinary tents, diverse colors, and sun protection, wind and rain, the use time could reach 8-10 years.In addition, the pagoda tent is matched with other shapes tents, which can be combined into a larger area and a more chic shape.

Do you know how the appearance of a simple pagoda tent is set up step by step? Today, ShengYixin will explain to you the installation and construction steps of prefabricated structure.

1.Measure and arrange materials according to tent and site size

Although the material of the pagoda tent is small, it is also necessary to pay attention to the placement of the location, the distance between the feet, and the details of safe construction.

2. Place the beams on the ground in a square shape

3. Connect the four beams with 3 way corner and firm them with screw

4. Insert one end of each of the four small purlin into the 3 way corner joint

5. Connect another end of small purlin with 4 way corner joint.

6. The cone housing is connected to the middle strut and fitted into the 4 way joint

7. Assemble the roof cover fabric

8. The bottom of fabric is stuck in the slot

9. Adjust the threaded rod to the roof fabric is taut,reach a wrinkle-free state

10. Connect the pillar adjust the distance.

11. Assemble the side wall cover fabric

12. Fix the foot base

Through these steps, a pagoda tent is installed.